Technical data sheet

self-venting safety coupling, Series BiTec series 125.F nominal flow diameter 7,8 -brass, nickel plated

self-venting safety coupling BiTec series 125.F nominal flow diameter 7,8 -brass, nickel plated

self-venting safety coupling BiTec series 125.F nominal flow diameter 7,8 -brass, nickel plated

self-venting safety coupling BiTec series 125.F nominal flow diameter 7,8 -brass, nickel plated

Technique

1) After coupling, the hose is pressurized when th egreen sliding sleeve is pushed forwad.
In this position, the safety sleeve prevents accidental uncoupling of the pressurized line.
2) Sliding the green safety sleeve back depressurizes the hose, and exposes the release sleeve.
3) The depressurized line can then be uncoupled by pulling the release sleeve in direction of the connection.

Fullfills the requirements of the DIN ISO 4414 and DIN EN 983.
The nominal flow rate is about 2050 l/min.

Areas of application

Pressure range

The coupling can be statically loaded up to 20 bar without pulsation.

Materials coupling

Connection, basic body brass, nickel plated
valve brass
release sleeve steal hardened and nickel plated
springs 1.4310
Balls 1.4034

Materials gasket

Seals made of nitrile butadiene rubber (NBR)
Hardness of material 70 Shore
Temperature range -30°C through +110°C
Temperature range -35°C through +110°C (allowed for short periods)
Gas permeability coefficient (Ø)=5
Resistant to mineral oils, fuels, water and watery liquids, fuel gas, hot air and many chemicals (on request)
If air or ozone are applied, hardening and brittleness (cracking) must be expected.

Materials connection

plug steel hardened, nickel plated

Characteristics

To be used with plug nipples with european standard-profile.

Female coupling

ConnectionDLL1SWOrder number
G1/43075919125.F0.KV8S.IG014.MNP
G3/83072919125.F0.KV8S.IG038.MNP
G1/230801242125.F0.KV8S.IG012.MNP

Male coupling

ConnectionDLL1SWOrder number
R1/430681219125.F0.KV8S.AR014.MNP
R3/830681319125.F0.KV8S.AR038.MNP
R1/230701722125.F0.KV8S.AR012.MNP

Hose tail coupling

ConnectionDNDLL1Order number
LW64,8306123,5125.F0.KV8S.ST006.MNP
LW86,5306123,5125.F0.KV8S.ST008.MNP
LW97,3306123,5125.F0.KV8S.ST009.MNP
LW107,8306123,5125.F0.KV8S.ST010.MNP
LW1311306123,5125.F0.KV8S.ST013.MNP

Female plug

ConnectionLL1L2SWOrder number
G1/83082014125.00.S000.IG018.SN0
G1/43382017125.00.S000.IG014.SN0
G3/83382019125.00.S000.IG038.SN0
G1/236102024125.00.S000.IG012.SN0

Male plug

ConnectionLL1L2SWOrder number
R1/83392014125.00.S000.AR018.SN0
R1/437122014125.00.S000.AR014.SN0
R3/837122017125.00.S000.AR038.SN0
R1/243172022125.00.S000.AR012.SN0

plug connector with hose connector

ConnectionLL1L2DOrder number
LW448252012125.00.S000.ST004.SN0
LW648252012125.00.S000.ST006.SN0
LW848252012125.00.S000.ST008.SN0
LW948252012125.00.S000.ST009.SN0
LW1048252012125.00.S000.ST010.SN0
LW1348252015125.00.S000.ST013.SN0

Related products

No responsibility is taken for the correctness of the details provided. The right is reserved to make alterations that are caused by further technical development and they do not justify any complaints either.

PDF back