Technical data sheet
Low pressure coupling manually locked, Series 126.V nominal flow diameter 7,8 - brass, nickel plated
Single-handed coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded release sleeve. Unintended unlocking can be prevented with a locknut which is manually secured against the connection. The de-coupling process is started by pushing the release sleeve back in the direction of the connection. The valve returns to its original position and pushes the plug connector out of the coupling.
Areas of application
The coupling can be statically loaded up to 35 bar without pulsation.
Basic body, connection, valve and locking disc brass, nickel plated
Release sleeve steel, hardened and nickel, plated
Pressure spring, snap ring 1.4310
Seals made of nitrile butadiene rubber (NBR)
Hardness of material 70 Shore
Temperature range -30°C through +110°C
Temperature range -35°C through +110°C (allowed for short periods)
Gas permeability coefficient (Ø)=5
Resistant to mineral oils, fuels, water and watery liquids, fuel gas, hot air and many chemicals (on request)
If air or ozone are applied, hardening and brittleness (cracking) must be expected.
Plug connector steel, hardened, nickel plated
Hose tail coupling
Hose tail plug
No responsibility is taken for the correctness of the details provided. The right is reserved to make alterations that are caused by further technical development and they do not justify any complaints either.